gear                       “Made by true Americans under real sweat shop conditions.”

O R D E R   N O W :    (805) 688-8286

 

MM-2000 mag mic                                                              DOWNLOAD SPECS


The MM-2000 is a world-class large-diaphragm tube condenser mic. It began as an evolution of the concept behind our U-87 and 451 tube retrofits: simpler is better. We wanted to outdo ourselves, though, in creating a recording instrument whose combination of versatility, consistency, and sonic excellence would be unmatched by any "must-have" studio mic at any price.


A hand-tested 6922 tube, nestled behind our premium European capsule, forms the heart of this beast. The housing, familiar from a famous national brand of industrial-strength flashlight, was chosen because everyone at one time or another has sung along into a flashlight or a hairbrush, and being that we're audio nerds with questionable grooming habits, none of us own hairbrushes. The fact that this housing is physically beautiful, extremely rugged, and acoustically dead might have had something to do with it too.


The MM-2000 features a 20db attenuator on the body of the mic as well as a continuously variable pattern selector on the custom-built external power supply. From omni to cardioid to figure-eight, the response and rejection of this mic are nothing short of superb, making the task of placement closer to sonic surgery than the educated guesswork it too often is. We have also strived to ensure that even if you don't have one of our matched pairs, any MM you pick up will behave virtually identically to any other.


Users have bombarded us with happy cliches like "Incredibly detailed and musical," "Sacrifices neither warmth nor clarity," "Anything you put in front of it just becomes huge," and our favorite: "Would be a bargain at three times the price." Probably the truest cliche of all, though, is that talking about sound is like dancing about architecture. So, we recommend you get your hands around one. Use it in any application next to your current favorite, or use it in ways that break the rules, and compare the results. The MM-2000 is certainly not cheap, nor is it even close to the most expensive end of the current market. Once you track with it, though, we're confident that you'll agree there is no better value on the planet.


Available in black, dark red, and electric blue. Twin-capsule stereo units may be built to order.





TUBE SERVICE

Microphone Disassembly Instructions for Tube Service


1.  Unscrew the mic base             2.  Unscrew XLR through access hole
                                                                                to release six pin connector.













3.  Loosen two forward grill hex bolts     4.  Tighten rear grill hex clockwise several turns
                                                                            to release grill.
                                                                            Tighten further to release electronics.
                                                                            Push entire unit through body.












      Pad switch: Left is off position



Note: When you have re-attached the XLR to the bottom of the screw cap, before you screw it on, put two counter-clockwise turns on the screw cap to counter any internal wire twisting when the cap is csrewed on.